Upon request, we offer an antibacterial treatment for our luminaires. This involves applying an antibacterial coating to the agreed surfaces of the lighting fixture.
The active nanotechnology layer effectively breaks down all organic substances, such as bacteria, viruses, molds, or volatile organic compounds (e.g., benzene, toluene). It also absorbs odors, smog, and cigarette smoke. Furthermore, the surface structure facilitates easier maintenance and decontamination of the treated areas.
For more information, please contact us.
Upon request, we offer a modification for luminaires (M598 and M623) designed for metal ceilings to enable snap-in installation.
Standard mounting of luminaires in the ceiling is done using steel brackets. In the case of the Clip-in modification, the luminaires snap into the ceiling in the same way as the ceiling tiles.
If interested, it is necessary to provide the exact specification of the ceiling, preferably with a sample of the tile and the clip-in profile.
Ecophon DS
Luminaire for ceilings with a concealed grid, so-called asymmetric ceilings. Luminaire dimensions: 599x599x85mm.
The luminaire is suspended in the ceiling using brackets on the main runner profile.
Removable opal diffuser in an aluminum frame. The luminaire is fully serviceable from below while in its working position in the ceiling. All functional components are replaceable. IP40 protection rating.
Ecophon LP
Semi-recessed luminaire for ceilings with a semi-concealed grid. Luminaire dimensions: 580x598x85mm.
The luminaire is suspended in the ceiling using brackets on the main runner profile.
Removable opal diffuser in an aluminum frame. The luminaire is fully serviceable from below while in its working position in the ceiling. All functional components are replaceable. IP40 protection rating.
Ecophon Clinic E
Luminaire for ceilings with recessed grids and overlapping edges. Luminaire dimensions: 575x575x85mm.
The luminaire is fixed in the ceiling using brackets built into the luminaire housing. Removable opal diffuser in an aluminum frame. The luminaire is fully serviceable from below while in its working position in the ceiling. All functional components are replaceable. IP40 protection rating.
As one of the few luminaire manufacturers, we offer the possibility of custom-made luminaire production, even in small batches.
Most frequently, it is necessary to modify the dimensions and shapes of recessed luminaires, as there is a large number of ceiling system manufacturers on the market and not everyone adapts to standard luminaire dimensions.
Luminaires with custom dimensions can be manufactured based on a sketch or drawing, or you can send us the specific ceiling type and we will adjust the size of our luminaire accordingly.
We are able to modify luminaires for connection to the air conditioning system. This requirement usually arises when designing offices, when there is no space in the ceiling for separate air vents, or they should not be there from an aesthetic point of view. We solve the modification in several ways.
The easiest way is to add holes in the back of the fixture and allow air to flow through the grille. Alternatively, by making air holes along the fixture outside the optical part.
An advanced variant is the design of the luminaire with a circular socket for air conditioning pipes and an independent channel for air conduction.
Access to the luminaire from the top above the suspended ceiling is usually required in clean rooms where it is impossible to service the luminaires normally from the room for operational reasons. We offer this option for most suspended ceiling luminaires. Before ordering, it is necessary to consult any technical requirements and adapt the mounting in these suspended ceilings.
In cases where fluorescent lamps are still in good condition or recently installed, we offer practical LED Retrofits to save on lighting costs. This is a reinforced sheet metal base with magnets on the bottom. On the top side are replaceable LED panels along with a ballast and a terminal block for connection. The Retrofit is installed into the fluorescent lamp simply by clicking it in using the magnets and connecting it to the original terminal block of the lamp.
We adjust the dimensions of the Retrofits according to the original luminaires and we also try to place the terminal block in the most suitable place for easy connection.
The Best Clean and LOS + Glass luminaires can be equipped with an optical louvre, which allows for changing the light distribution characteristics.
By tilting the individual louvres inside the luminaire, you can alter its light distribution pattern and thus better illuminate areas that would otherwise remain poorly lit.
If you are interested in this modification, please contact us to discuss the details.
In some cases, it is advantageous to have the option of coloring white light with colored light.
Luminaires equipped with RGBW LED modules (i.e. red, green, blue and white) are used, for example, in operating rooms for two reasons. One is the doctor’s better ability to distinguish, and the other is the patient himself and the lighting mood in the space where the examination is taking place.
Please contact us for more information and options.
Tunable White is a concept that allows you to change the color temperature of white light and thus support a person’s natural biorhythms.
Více informací na stránce http://www.cepelik.cz/tunable-white/
Chutnovka 77511 01
Mírová pod Kozákovem – Turnov Czech Republic
Company ID: 02151537 / VAT: CZ02151537
email:info@cepelik.cz
www.cepelik.cz
©ELKOVO ČEPELÍK s.r.o. | Proudly implemented by the agency Zpromotion s.r.o.
© 2025. All rights reserved.
